Eter mmanụ ala

Ọkwa ụlọ ọrụ CAS 8032-32-4 99% Eter mmanụ ala

 

Aha ngwaahịa:  Eter mmanụ ala

Ọkwa: Ụlọ ọrụ mmepụta ihe

Njirimara: Liquid

Nkwakọ ngwaahịa: 200kg / drum

MOQ: 1 n'arọ

Nchekwa: Ebe dị jụụ na nkụ

Ndụ shelf: afọ 2



Nkọwa

Tags

Nkọwa ngwaahịa

 

Eter mmanụ ala is a colorless transparent liquid, with the smell of kerosenes.  It's mainly a mixture of pentanes and hexanes.  Insoluble in water, soluble in anhydrous ethanol, benzene, chloroforms, oil and other organic solvents.  Flammable and explosive, can react strongly with oxidizing agents.  Mainly used as solvent and grease treatment.  It is usually obtained from platinum reforming residual oil or straight run gasolines  by fractionation, hydrogenation or other methods.

 

Ngosipụta ngwaahịa

 

<trp-post-container data-trp-post-id='7039'>Petroleum ethers</trp-post-container><trp-post-container data-trp-post-id='7039'>Petroleum ethers</trp-post-container><trp-post-container data-trp-post-id='7039'>Petroleum ethers</trp-post-container><trp-post-container data-trp-post-id='7039'>Petroleum ethers</trp-post-container>

 

Atụmatụ

 

Aha ngwaahịa:Eter mmanụ ala
Ọdịdị: mmiri mmiri transperent enweghị agba 
Ntụgharị ntụgharị: n20/D 1.428 
Ọnọdụ Nchekwa: Chekwaa na ụlọ okpomọkụ. 
Color:APHA: ≤10 
Isi: mmanụ ụgbọala ma ọ bụ kerosene 
Mmiri (H2O): 0.015% 
Ngwakọta sọlfọ (dị ka SO4): 0.015% 

 

Ngwa

 

  1. solvent naphtha by boiling point range is divided into 120~160ºC, 120~180ºC, 140~200ºC three. It is used as a solvent for coatings made of coal tar pitch, stearic acid pitch, petroleum pitch, etc. The high boiling point components are used as diluents for cellulose esters and synthetic resins, while the others are used as solvents for the manufacture of dye intermediates. Adding petroleum solvent to naphtha can increase the solubility.
    2. A na-eji ya dị ka fatịlaịza kemịkalụ, mmepụta ethylene na ihe na-emezigharị catalytic, a pụkwara iji ya mee ihe na mmepụta mmanụ ihe mgbaze ma ọ bụ dị ka ihe ngwakọta nke ngwaahịa mmanụ ụgbọala.
    3.Used for Coating

 

Uru

 

Anyị nwere ọtụtụ ụlọ ọrụ dị elu nke nwere nkwado miri emi, nke nwere ike inye gị ngwaahịa dị elu na ọnụ ahịa asọmpi. Anyị nwekwara ike inye ego maka nnukwu ịzụrụ ihe. Anyị na-akwado ọtụtụ ụlọ ọrụ na-ebuga ibu ndị ọkachamara, nwere ike ịnapụta ngwaahịa n'enweghị nsogbu na aka gị. Oge nnyefe bụ ihe dịka ụbọchị 3-20 mgbe nkwenye nke ịkwụ ụgwọ gasịrị.

 

Nkọwapụta

 

Ebe mgbaze  -90°C
Ebe esi nri  215-219 °C(lit.)
njupụta  0.885 g/mL at 25 °C(lit.)
uzuoku njupụta  6.4 (na ikuku)
uzuoku mgbali  0.15 mm Hg ( 20 °C)
index refractive  n20/D 1.436(lit.)
Fp  175 °F
nchekwa okpomọkụ.  2-8°C
solubility  0.1g/l
ụdị  Mmiri mmiri
agba  Kpochapụ
Isi Ester dị ka isi
mgbawa ịgba 0.9-6.0% (V)
Mmiri Solubility  <0.1 g/100 mL at 22 ºC
BRN  1765828
Nkwụsi ike Stable Stable, mana polymerizes ngwa ngwa, yabụ a na-egbochikarị ya na hydroqinone ma ọ bụ monomethyl ether. Na-eguzogide hydrolysis. Enwere ike ịgbanwu ọkụ. Ekwekọrịtaghị na ndị ọrụ oxidizing.

 

&lt;trp-post-container data-trp-post-id=&#039;7039&#039;&gt;Petroleum ethers&lt;/trp-post-container&gt;&lt;trp-post-container data-trp-post-id=&#039;7039&#039;&gt;Petroleum ethers&lt;/trp-post-container&gt;&lt;trp-post-container data-trp-post-id=&#039;7039&#039;&gt;Petroleum ethers&lt;/trp-post-container&gt;&lt;trp-post-container data-trp-post-id=&#039;7039&#039;&gt;Petroleum ethers&lt;/trp-post-container&gt;
Ihe ọmụma ngwaahịa:

 

Petroleum ethers is a colorless transparent liquid, with the smell of kerosenes.  It's mainly a mixture of pentanes and hexanes.  Insoluble in water, soluble in anhydrous ethanol, benzene, chloroforms, oil and other organic solvents.  Flammable and explosive, can react strongly with oxidizing agents.  Mainly used as solvent and grease treatment.  It is usually obtained from platinum reforming residual oil or straight run gasolines  by fractionation, hydrogenation or other methods. 
 

  1. solvent -naphtha by boiling point range is divided into 120~160ºC, 120~180ºC, 140~200ºC three. It is used as a solvent for coatings made of coal-tar pitch, stearic acid pitch, petroleum pitch, etc. The high boiling point components are used as diluents for cellulose esters and synthetic resins, while the others are used as solvents for the manufacture of dye intermediates. Adding petroleum solvent to -naphtha can increase the solubility.
  2. Ejiri ya dị ka fatịlaịza kemịkalụ, mmepụta ethylene na ihe na-emezigharị akụrụngwa, nwekwara ike iji mee ihe na mmepụta mmanụ ihe mgbaze ma ọ bụ ihe ngwakọta nke ngwaahịa mmanụ ụgbọala.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ọ bụrụ na ị nwere mmasị na ngwaahịa anyị, ị nwere ike ịhọrọ ịhapụ ozi gị ebe a, anyị ga-akpọtụrụ gị n'oge na-adịghị anya.


Dee ozi gị ebe a ziga anyị ya