Silicon Carbide

Silicon carbide, an inorganic compound with the chemical formula SiC, is produced by high-temperature smelting of quartz sand, petroleum coke (or coal coke), and wood chips (salt is added when producing green silicon carbide) in a resistance furnace. Silicon carbide is a semiconductor and exists in the form of the extremely rare mineral moissanite in nature. It has been mass-produced as powder and crystals since 1893 and is used as an abrasive, among other things. Of the non-oxide high-tech refractory raw materials such as C, N, and B, silicon carbide is the most widely used and economical, and can be called garnet sand or refractory sand. In China, industrial-produced silicon carbide is divided into black silicon carbide and green silicon carbide, both of which are hexagonal crystals.

Silicon carbide has two commonly used varieties of black silicon carbide and green silicon carbide, both of which belong to alpha-SiC.

① Black silicon carbide contains about 95% SiC, which has higher toughness than green silicon carbide, and is mostly used to process materials with low tensile strength, such as glass, ceramics, stone materials, refractory materials, cast iron, and non-ferrous metals.

② Green silicon carbide contains more than 97% SiC, has good self-sharpening properties, and is mostly used to process cemented carbide, titanium alloys, and optical glass. It is also used for honing cylinder liners and fine grinding high-speed steel tools. In addition, there is also cubic silicon carbide, which is a yellow-green crystal obtained by special process, and the grinding tools made of it are suitable for ultra-precision processing of bearings, which can process the surface roughness from Ra32 to 0.16 microns to Ra0.04 to 0.02 microns in one process.

Due to its high thermal stability, high strength, high thermal conductivity, etc., it is widely used in atomic energy materials, chemical devices, high-temperature treatment, electric heating elements, and resistors, etc. It is used in abrasives, wear-resistant agents, abrasives, high-grade refractory materials, and fine ceramics.
It is used in abrasives, wear-resistant agents, abrasives, high-grade refractory materials, and fine ceramics.
It is suitable for manufacturing various types of silicon carbide abrasives and ceramic kiln furniture, as well as refractory materials.
It is used in abrasives, high-grade refractory materials, and fine ceramics, etc.
It is used as a reinforcing fiber for composite materials such as resins and metals, and can also be used as an electromagnetic wave absorbing material and heat-resistant material.
It serves as a unidirectional reinforcing material for composite materials, improving various properties. When combined with plastics, metals, and ceramics, it can improve various properties. It can be combined with thermoplastic and thermosetting resins to significantly improve the strength, flexural modulus, thermal conductivity, and wear resistance of plastics. When 15% silicon carbide whiskers are added to PEEK, the thermal conductivity is increased by about 2 times, and the flexural strength of 20% silicon carbide-reinforced polyimide is increased by about 2 times at room temperature, and is the same as the unreinforced case at 250°C. The wear rate is reduced by 17% when 15% silicon carbide is added to epoxy resin.

当社は、緊密な協力関係にある多くの高品質の工場を有しており、高品質の製品と競争力のある価格を提供できます。また、大量購入には割引も提供できます。また、当社は多くの専門の貨物運送会社と協力し、製品を安全かつスムーズにお客様の手元に届けることができます。納期は、支払い確認後約3〜20日です。

Natural existence
Moissanite in nature exists only in very small amounts in certain types of meteorites, corundum deposits, etc. Most of the silicon carbide currently sold worldwide, including moissanite jewelry, is synthetic.
In 1893, Mosan first discovered the naturally occurring form of silicon carbide in meteorites in Arizona, and in 1905, the material was named Moissanite. [5] But Dr. Mossan's findings were initially questioned because his samples may have been contaminated with the silicon carbide saw blades already on the market at the time. [6]
Silicon carbide is rare on Earth, but common in space. Silicon carbide found in space and meteorites is mostly β-SiC. Analysis of SiC particles found in the Murchison meteorite revealed an unusual isotopic ratio of carbon to silicon, suggesting that the particles originated outside the solar system. [7]
Scale production
Silicon carbide is a kind of carbide accidentally discovered in the laboratory by the American Acheson during the electromelting diamond experiment in 1891. At that time, Acheson was trying to make artificial diamonds, when he heated clay (aluminum silicate) and powdered coke (carbon) in an iron bowl, the formation of blue crystals, which was mistaken for a mixture of diamond, so the name emery. In 1893, Acheson studied the method of industrial smelting silicon carbide, which is often called Acheson furnace, which has been used until now, a resistance furnace with carbon materials as the core body of the furnace, and a mixture of quartz SiO2 and carbon is heated by electricity to generate silicon carbide.

1. 貴社は工場ですか、それとも貿易会社ですか?
当社は産業と貿易を統合し、ワンストップサービスを提供する会社です。OEMも受け付けております。

2. サンプルは提供されますか? 無料ですか、それとも追加料金がかかりますか?
サンプルは無料です。サンプルの送料はお客様負担となります。

3. 品質管理に関する証明書はありますか?
品質を保証する ISO 9001:2008 認証。

4. 見積もりを取得するには、何を提供すればよいですか?
必要な製品タイプ、注文数量、住所、具体的な要件をお知らせください。参考用に見積書をすぐに作成いたします。

5. どのような支払い方法をご希望ですか? どのような条件が受け入れられますか?
受け入れられる配送条件: FOB、CFR、CIF、EXW。
受け入れられる支払い通貨：USD;
受け入れられる支払いタイプ: T/T、Western Union、Paypal、Trade Assurance。
使用言語：英語。