Heavy calcium carbonate, also called ground calcium carbonate, is produced by natural superior calcite, which has high purity and whiteness. The size ranges from under 400 mesh which is called primary products, to 2000 mesh or above, depending on your requirement.
Heavy (Ground) Calcium Carbonate is widely used as filler and improver in plastic, paint, paper-making, rubber, pharmacy, feed, daily chemical, ceramics, adhesives and ink industry.
Ապրանքի ցուցադրում
1)Rubber:
it can reduce the amount of expensive natural rubber,increase its volume ,reduce costs, After adding calcium carbonate then can be obtain higher strength tensile ,tear strength and abrasion resistance than the pure Rubber vulcanizate
2)Chemical manufacturing materials
it is heat-proof, chemical corrosion-proof,cold-proof, anti-noise, shockproof and easy to process. Therefore it can be used to make doors, dry motar ,ceilings, wallboard,waterpipe,handrail of stairs,floor board and electric wire,etc.
3)Painting& coating:
it is as the filling and as the framework, Latex paint more than 30% amount are used in thick paint ,26%-60% amount are used in water-based pain
4)Plastic:
it can increase the volume of plastics, reduce the costs, improve the size, stability, hardness and tenacity of plastic products.
5)Paperpulp material:
it can fully make use of its high whiteness, affinity to water and shock intensity, low cost widely using .
6) Coal-fired power and planted sulfurization
7)Feed,pharmaceutical industry
making calcium additives, replace the original shell powder to reduce costs.
Մենք ունենք խորը համագործակցությամբ բազմաթիվ բարձրորակ գործարաններ, որոնք կարող են ձեզ ապահովել բարձրորակ արտադրանք և մրցունակ գներ: Եվ մենք կարող ենք նաև զեղչեր տալ մեծաքանակ գնումների համար: Եվ մենք համագործակցում ենք բազմաթիվ պրոֆեսիոնալ բեռնափոխադրող ընկերությունների հետ, կարող ենք անվտանգ և սահուն ապրանքներ հասցնել ձեր ձեռքին: Առաքման ժամկետը վճարման հաստատումից հետո մոտ 3-20 օր է:
ԹԵՍՏԱՅԻՆ ԿԵՏԵՐ
|
TEST STANDARD
|
TEST RESULT
|
||
CaCO3 %
|
≥98%
|
99%
|
||
Խոնավություն
|
≤0.3%
|
0.3%
|
||
WHITENESS
|
≥92%
|
95.5%
|
||
PH
|
8-10
|
9.3
|
||
PB
|
≤0.001%
|
_
|
||
FE
|
≤0.1%
|
0.05%
|
||
MN
|
≤0.0045%
|
-
|
||
MESH
|
-
|
400 MESH
|
||
CONCLUSION
|
SUPERIOR PRODUCTS
|
2.Application
1)Rubber: it can reduce the amount of expensive natural rubber,increase its volume ,reduce costs, After adding calcium carbonate then can be obtain higher strength tensile ,tear strength and abrasion resistance than the pure Rubber vulcanizate
2)Chemical manufacturing materials: it is heat-proof, chemical corrosion-proof,cold-proof, anti-noise, shockproof and easy to process. Therefore it can be used to make doors, dry motar ,ceilings, wallboard,waterpipe,handrail of stairs,floor board and electric wire,etc.
3)Painting& coating: it is as the filling and as the framework, Latex paint more than 30% amount are used in thick paint ,26%-60% amount are used in water-based pain
4)Plastic, it can increase the volume of plastics, reduce the costs, improve the size, stability, hardness and tenacity of plastic products.
5)Paperpulp material: it can fully make use of its high whiteness, affinity to water and shock intensity, low cost widely using .
Ապրանքների կատեգորիաներ