3-chloro-2-hydroxypropyl trimethyl ammonium chloride is a colorless transparent liquid, soluble in a small amount of water. Melting point 191-193°C, density 1.154 g/mL at 25 °C, vapor pressure 0.001Pa at 20 °C, refractive index n20/D 1.4541, flash point >230 °F.
AT-10 liquid cationic etherifying agent can be widely used as a cationic additive in the following fields:
(1) The papermaking industry mainly serves as a liquid cationic etherification agent, which is widely used in the modification of cellulose, cellulose derivatives, and starch; Reacting with starch to obtain cationic starch, it can be used as an internal sizing binder, paper reinforcing agent, filler, and auxiliary agent for fine fiber interception in paper.
(2) The AT-10 liquid cationic etherification agent in the textile industry reacts with cotton Chemicalbook flower fibers to improve the adhesion of dyes; Reacting with starch to obtain cationic starch, which can be used as a warp sizing agent.
(3) Suspended solids in industrial water treatment exhibit negative charge, and cationic polymers generated by reacting with AT-10 liquid cationic etherification agents are widely used as flocculants in water purification.
(4) The cationic guar gum produced by the reaction between the daily chemical industry and AT-10 liquid cationic etherification agent is an important daily chemical
Nou gen anpil faktori-wo kalite ak gwo koperasyon, ki ka ba ou bon jan kalite pwodwi ak pri konpetitif. Epi nou ka bay tou rabè pou acha esansyèl. Epi nou kolabore ak anpil konpayi transpò machandiz pwofesyonèl, ka delivre pwodwi san danje epi san pwoblèm nan men ou. Tan livrezon se sou 3-20 jou apre konfimasyon peman an.
Aparans | Colorless and clear liquid |
3-Chloro-2-Hydroxypropyl Trimethyl Ammonium Chloride |
≥69% |
Moisture content | ≤31% |
Relative Density | 1. 16 g/cm2 (20ºC) |
Autoignition Temperature | Non Hypergolic |
Crystallization Point | - 14 ºC |
pH (10% aqueous solution) | 5.0-7.0 |
Viscosity | 13-20 MPA.S(25ºC) |
Estabilite | STABLE |
Solubility in Water | Very soluble |
Prohibited content | Strong oxidant, strong base, strong acid |
Test equipment | Gas chromatograph |
Test temperature | Column temperature: 120ºC Sample injector: 200ºC |
1. Èske ou se yon faktori oswa yon konpayi komès?
Nou se yon konpayi entegre endistri ak komès, bay yon sèl-stop service.OEM ta ka aksepte.
2. ou bay echantiyon yo genyen? Èske li gratis oswa siplemantè?
Echantiyon gratis. Frè machandiz echantiyon an bezwen peye bò kote ou.
3. Èske ou gen nenpòt sètifika ki gen rapò ak kontwòl kalite?
ISO 9001:2008 sètifikasyon asire bon jan kalite.
4. Kisa mwen ta dwe bay pou jwenn yon sitasyon?
Pls enfòme nou sou kalite pwodwi ou bezwen, kantite lòd, adrès ak kondisyon espesifik yo.Y ap fè sitasyon an pou referans ou nan tan.
5. Ki kalite metòd peman ou pito? Ki kalite kondisyon yo aksepte?
Kondisyon livrezon yo aksepte: FOB, CFR, CIF, EXW;
Aksepte Peman Lajan:USD;
Kalite Peman Aksepte: T/T, Western Union; Paypal, asirans komès.
Lang pale: Angle.
Kategori pwodwi yo