3-chloro-2-hydroxypropyl trimethyl ammonium chloride is a colorless transparent liquid, soluble in a small amount of water. Melting point 191-193°C, density 1.154 g/mL at 25 °C, vapor pressure 0.001Pa at 20 °C, refractive index n20/D 1.4541, flash point >230 °F.
AT-10 liquid cationic etherifying agent can be widely used as a cationic additive in the following fields:
(1) The papermaking industry mainly serves as a liquid cationic etherification agent, which is widely used in the modification of cellulose, cellulose derivatives, and starch; Reacting with starch to obtain cationic starch, it can be used as an internal sizing binder, paper reinforcing agent, filler, and auxiliary agent for fine fiber interception in paper.
(2) The AT-10 liquid cationic etherification agent in the textile industry reacts with cotton Chemicalbook flower fibers to improve the adhesion of dyes; Reacting with starch to obtain cationic starch, which can be used as a warp sizing agent.
(3) Suspended solids in industrial water treatment exhibit negative charge, and cationic polymers generated by reacting with AT-10 liquid cationic etherification agents are widely used as flocculants in water purification.
(4) The cationic guar gum produced by the reaction between the daily chemical industry and AT-10 liquid cationic etherification agent is an important daily chemical
Wy hawwe in protte heechweardige fabriken mei djippe gearwurking, dy't jo produkten fan hege kwaliteit en konkurrearjende prizen kinne leverje. En wy kinne ek jouwe koartingen foar bulk oankeapen.En wy gearwurkje mei in protte profesjonele frachtferfier bedriuwen, kinne leverje produkten feilich en soepel oan jo hannen. Levertiid is sawat 3-20 dagen nei befêstiging fan betelling.
Ferskining | Colorless and clear liquid |
3-Chloro-2-Hydroxypropyl Trimethyl Ammonium Chloride |
≥69% |
Moisture content | ≤31% |
Relative Density | 1. 16 g/cm2 (20ºC) |
Autoignition Temperature | Non Hypergolic |
Crystallization Point | - 14 ºC |
pH (10% aqueous solution) | 5.0-7.0 |
Viscosity | 13-20 MPA.S(25ºC) |
Stabiliteit | STABLE |
Solubility in Water | Very soluble |
Prohibited content | Strong oxidant, strong base, strong acid |
Test equipment | Gas chromatograph |
Test temperature | Column temperature: 120ºC Sample injector: 200ºC |
1. Binne jo in fabryk of in hannelsbedriuw?
Wy binne in bedriuw dat yndustry en hannel yntegrearret, en leveret ien-stop service.OEM koe wurde akseptearre.
2. Biede jo samples? Is it fergees of ekstra?
Fergees samples. De frachtfergoeding fan 'e stekproef moat troch jo kant betelle wurde.
3. Hawwe jo sertifikaten yn ferbân mei kwaliteitskontrôle?
ISO 9001: 2008-sertifikaasje om kwaliteit te garandearjen.
4. Wat moat ik leverje om in offerte te krijen?
Pls ynformearje ús oer it produkttype dat jo nedich binne, bestellingskwantiteit, adres en spesifike easken.
5. Hokker soarte fan betelling metoade jo leaver? Hokker soarte betingsten wurde akseptearre?
Akseptearre leveringsbetingsten: FOB, CFR, CIF, EXW;
Akseptearre betellingsfaluta: USD;
Akseptearre betellingstype: T / T, Western Union; Paypal, Trade Assurance.
Sprektaal: Ingelsk.
Products kategoryen