Gellan gum can be utilized in confectionery and bakery products. The major function of gellan gum in confectionery products is to provide structure and texture to reduce the set time of starch jellies. Starch jellies normally take 24 to 48 h to set, while the introduction of gellan reduces setting time to 10-12 h. In addition, gellan can prevent moisture fluctuations in sugary foods, icings and toppings, and the required gellan gum concentration in these products is only one fifth of the commonly used agar .
Pontšo ea lihlahisoa
Gellan Gum is natural occurred biopolymer that produced by carbohydrate fermentation with Pseudomonas elodea.It is white or creamy white powder.It is soluble in water to form viscous solution,but not soluble in solvent.
Gellan Gum is excellent water gelling agent, thickener, suspending agent,,rheology controller,etc in broad applications,that includes food,cosmetic and personnel care,industrial,etc.
Gellan gum is used primarily as a gelling agent, alternative to agar. As a food additive, gellan gum is used as thickeers, enmulsifier. It is used in soya milks to keep the soy protein suspended in the milk.
Gellan gum is used mainly in the food industry as an anti-settling agent, thickeners, stabilizer or to structure prepared foods. Used in very small doses, it acts as an anti-settling agent in liquids, while adding only a very light viscosity. It may well allow, for example, the uniform distribution of cocoa in chocolate milks or strengthening agents like calcium or fiber in all kinds of beverages. At present Gellan gum has gradually replace agar agar and carrageenan use.
Re na le lifeme tse ngata tsa boleng bo holimo tse nang le tšebelisano e tebileng, tse ka u fang lihlahisoa tsa boleng bo holimo le litheko tsa tlholisano. Hape re ka fana ka litheolelo bakeng sa ho reka ka bongata.'Me re sebelisana le lik'hamphani tse ngata tsa litsebi tse tsamaisang thepa, li ka isa lihlahisoa ka mokhoa o sireletsehileng le ka thelelo matsohong a hau. Nako ea ho fana e ka ba matsatsi a 3-20 ka mor'a hore ho netefatsoe tefo.
ITEM |
TS'ELISO |
LIPHETHO |
Ponahalo |
Off-white powder |
E lumellana |
Purity (CO2 Yielding, %) |
3.3 ~ 6.8 |
5.3 |
Nitrogen (%) |
≤3 |
E lumellana |
Loss on Drying (105 °C, 2.5 hours, %) |
≤15 |
4.2 |
Transmittance (%) |
≥ 80 |
84.5 |
Gel Strength (g/ cm2) |
>900 |
1025 |
Ashes (%) |
<12 |
10.8 |
Isopropyl Alcohol (mg/ kg) |
≤750 |
E mpe |
pH |
6.0- 8.0 |
7 |
Lead (Pb) |
≤2 mg/ kg |
<2 mg/ kg |
Mercury (Hg) |
≤1 mg/ kg |
<1 mg/ kg |
Arsenic (As) |
≤3 mg/ kg |
<3 mg/ kg |
Cadmium (Cd) |
≤1 mg/ kg |
<1 mg/ kg |
Total Heavy Metals (as Pb) |
≤20 mg/ kg |
<20 mg/ kg |
Total Plate Count (cfu/g) |
≤ 10,000 |
E lumellana |
Moulds & Yeasts (cfu/g) |
≤ 400 |
E mpe |
Salmonella spp./ 10g |
E mpe |
E mpe |
E. coli/ 5g |
E mpe |
E mpe |
Particle Size |
Min 95% Pass 80 mesh |
E lumellana |
Applications
Lihlopha tsa lihlahisoa