1. It is a good solvent and rocket fuel for resins, varnishes, pigments, and can also be used in synthetic fibers, rubber, pesticides and casting industries
2. Used as raw material for synthesis of various furan resins, anticorrosive coatings, is also a good solvent
3.GB 2761--1997 specifies the permissible use of food spices. It is mainly used to prepare coke flavor. FDA, § 175.105: Specified as an indirect food additive (binder).
4. Solvent. Organic synthesis (manufacture of anthracene, resin, etc.). Preservative. Spices.
5. Furfuryl alcohol is used in organic synthesis, and levulinic acid (fruit acid) is an intermediate of nutritional drug calcium fructoconate. Furfuran resin with various properties (such as furfuran alcohol resin, furfuran I or furfuran II resin), furfuran alcohol-urea Chemicalbook aldehyde resin and phenolic resin, etc. The cold resistance of the plasticizer prepared from furfuryl alcohol is better than that of butyl, octanol ester, and it is also a good solvent for furan resin, varnish, pigment and rocket fuel. In addition, it is also used in the synthetic fiber, rubber, pesticide and casting industry
Multas officinas summus qualitas habemus cum magna cooperatione, quae vobis praebere potest magnas qualitates productorum et pretia competitive. Etiam infringo pro mole emptionibus dare possumus. Et nos cooperamur cum multis onerariis professionalibus societatibus transmissis, fructus tuto ac blande manibus tuis tradere possumus. Partus tempus est circiter 3-20 dies post confirmationem solutionis.
Molecular Formula | C5H6O2 |
Molar Mass | 98.1 |
Density | 1.135 g/mL at 25 °C (lit.) |
Liquefactio Point | -29 °C (lit.) |
Boling Point | 170 °C (lit.) |
Flash Point | 149°F |
JECFA Number | 451 |
Aqua Solubility | MISCIBLE |
Solubility | alcohol: soluble |
Vapor Presure | 0.5 mm Hg ( 20 °C) |
Vapor Density | 3.4 (vs air) |
Aspectus | Liquid |
Color | Patet |
Odor | Mildly irritating. |
Exposure Limit | NIOSH REL: TWA 10 ppm (40 mg/m3), STEL 15 ppm (60 mg/m3), IDLH 75ppm; OSHA PEL: TWA 50 ppm; ACGIH TLV: TWA 10 ppm, STEL 15 ppm (adopted). |
Merck | 14,4305 |
BRN | 106291 |
pKa | 14.02±0.10(Predicted) |
PH | 6 (300g/l, H2O, 20℃) |
Storage Condition | Store below +30°C. |
Explosive Limit | 1.8-16.3%(V) |
Refractive Index | n20/D 1.486(lit.) |
Physical and Chemical Properties | Character: a colorless, flowable liquid that turns brown or deep red when exposed to sunlight or air. Bitter taste. boiling point 171 ℃ freezing point -29 ℃ relative density 1.1296 refractive index 1.4868 flash point 75 ℃ solubility is miscible with water, but unstable in water, soluble in ethanol, ether, benzene and chloroform, insoluble in petroleum hydrocarbons. |
Usus | Used as a raw material for the synthesis of various furan-type resin, anti-corrosion coatings, is also a good solvent |
1. esne officinam vel negotiationem societatis?
Societas industriae et mercaturae sumus integrantes, si unus-subsisto servicio.OEM accipi posset.
2. Tu exempla praebes? Estne gratis an extra?
Free samples.The sample's fee need to be paid by your side.
3. Habesne testimoniales ad quale imperium?
ISO 9001:2008 certificatio qualitatis curandae.
4. Quid providere possim sententia?
Pis nos certiores facti generis, quod opus est, quantitatem, electronicam ac peculiarem requisita. Auctoritas pro tempore referenda erit.
5. Quod genus solucionis modum vultis Quales condiciones accipiuntur?
Accepta Delivery Terms: FOB, CFR, CIF, EXW;
Accepted Payment Currency:USD;EUR
Type: T/T, Western Union; Coin Paypal, Trade Assurance.
Lingua Latina.
Products categories