Ferro silicon from the HENGSHENG Metallurgical Refactory is a ferrosilicon alloy composed of silicon and iron in a certain proportion. Ferro silicon is an inoculant used in steelmaking,iron making and foundry by combining silicon and iron elements made by machines.Ferro silicon is generally used in metallurgy and machinery industries for dephosphorization, deoxidation and purification.
1.Ferrosilicon is very common in steelmaking industry.
Ferrosilicon is mainly used as deoxidizing and alloying agent;
2.In the industry of cast iron, it is used as inoculant and spheroidizer;
3.When the electrode is made, it can be used as the coating of the electrode.
Silicon slag is widely used in steel slag smelting pig iron, ordinary casting, etc., can improve furnace temperature, dilute molten iron, increase the fluidity of molten iron, promote slag discharge, increase the mark.
1. Silicon slag can be used to recrystallize and purify;
2. Effectively discharge slag, increase the label, improve the toughness and cutting ability of the casting, stainless steel manufacturers with electric furnace smelting stainless steel process, with slag as reducing agent, improve efficiency and output;
In cupola casting, it can replace ferrosilicon, reduce production cost, improve toughness and cutting ability of castings. It can also be used as reducing agent for resmelting stainless steel in electric furnace, which can effectively improve production efficiency, increase output and reduce production cost.
Size:
0--1mm, 0--3mm, 0-10mm, 1-10mm, 10-30mm, 10-80mm, 10-100mm
Kalitate handiko lantegi asko ditugu lankidetza sakonarekin, kalitate handiko produktuak eta prezio lehiakorrak eskain diezazkizuten. Eta ontziratu gabeko erosketetarako deskontuak ere eman ditzakegu. Eta merkantzien bidalketa-enpresa profesional askorekin lankidetzan aritzen gara, produktuak segurtasunez eta leunki entregatu ditzakegu zure eskuetara. Bidalketa-epea 3-20 egun ingurukoa da ordainketa baieztatu eta gero.
Grade | Chemical Composition (%) | |||||||
Si | Al | Ca | Mn | Cr | P | S | C | |
≤ | ||||||||
FeSi75Al0.5-A | 74.0-80.0 | 0.5 | 1.0 | 0.4 | 0.3 | 0.035 | 0.020 | 0.10 |
FeSi75Al0.5-B | 72.0-80.0 | 0.5 | 1.0 | 0.5 | 0.5 | 0.040 | 0.020 | 0.20 |
FeSi75Al1.0-A | 74.0-80.0 | 1.0 | 1.0 | 0.4 | 0.3 | 0.035 | 0.020 | 0.10 |
FeSi75Al1.0-B | 72.0-80.0 | 1.0 | 1.0 | 0.5 | 0.5 | 0.040 | 0.020 | 0.20 |
FeSi75Al1.5-A | 74.0-80.0 | 1.5 | 1.0 | 0.4 | 0.3 | 0.035 | 0.020 | 0.10 |
FeSi75Al1.5-B | 72.0-80.0 | 1.5 | 1.0 | 0.5 | 0.5 | 0.040 | 0.020 | 0.20 |
FeSi75Al2.0-A | 74.0-80.0 | 2.0 | 1.0 | 0.4 | 0.3 | 0.035 | 0.020 | 0.10 |
FeSi75Al2.0-B | 72.0-80.0 | 2.0 | -- | 0.5 | 0.5 | 0.040 | 0.020 | 0.20 |
FeSi75-A | 74.0-80.0 | -- | -- | 0.4 | 0.3 | 0.035 | 0.020 | 0.10 |
FeSi75-B | 72.0-80.0 | -- | -- | 0.5 | 0.5 | 0.040 | 0.020 | 0.20 |
FeSi65 | 65.0-72.0 | -- | -- | 0.6 | 0.5 | 0.040 | 0.020 | -- |
FeSi45 | 40.0-47.0 | -- | -- | 0.7 | 0.5 | 0.040 | 0.020 | -- |
Ferrosilicon is broken into a certain proportion of small pieces and filtered through a certain number of mesh sieve leakage on the formation of ferrosilicon inoculant, simply speaking, ferrosilicon inoculant is made of ferrosilicon natural block and standard block in accordance with a variety of different particle size broken out of small particles.
1. It can be deoxidized effectively when making steel;
2. Greatly reduce the time of steel deoxidation to save energy waste and manpower;
3. It can promote the precipitation and spheroidization of graphite in production of nodular cast iron;
4. It can be used instead of expensive inoculant and spheroidizing agent.
5. Effectively reduce the smelting cost and improve the benefits of manufacturers.
1. Fabrika edo merkataritza-enpresa bat al zara?
Industria eta merkataritza integratzen dituen enpresa bat gara, zerbitzu bakarra eskaintzen duena. OEM onar liteke.
2. Laginak ematen al dituzu? Doakoa ala gehigarria da?
Doako laginak. Laginaren merkantzien tasa zure alboan ordaindu behar da.
3. Ba al duzu kalitate kontrolarekin lotutako ziurtagiririk?
ISO 9001:2008 ziurtagiria kalitatea bermatzeko.
4. Zer eman behar dut aurrekontua lortzeko?
Mesedez, jakinarazi behar duzun produktu-mota, eskaera-kopurua, helbidea eta baldintza zehatzak. Aipamena zure erreferentziarako egingo da denboran.
5. Zein ordainketa-metodo nahiago duzu? Nolako baldintzak onartzen dira?
Onartutako entrega-baldintzak: FOB, CFR, CIF, EXW;
Onartutako Ordainketa Moneta:USD;
Onartutako Ordainketa Mota: T/T,Western Union; Paypal, Merkataritza Bermea.
Hitz egiten den hizkuntza: ingelesa.
Produktuen kategoriak